C1-Body Stripping - NCRS Discussion Boards

C1-Body Stripping

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Jerry C.
    Very Frequent User
    • November 1, 1995
    • 741

    C1-Body Stripping

    Stripping the body on a 59 to bare glass and wiping down with lacquer thinner. What should be my next step to make sure the glass is clean? Do I wash with soap and water and if so what kind of soap? Thanks
  • Dennis C.
    NCRS Past Judging Chairman
    • January 1, 1984
    • 2409

    #2
    Re: C1-Body Stripping

    Jerry - Lacquer thinner works well. Don't think you need some "special" cleaner. When you shoot the "primer", pay attention to how it reacts. I use Morton's Eliminator 100 as somewhat of a "bullet-proof" primer - but there are others out there - and nobody is paying me to sell their product. As in most paint jobs, prep is 95% - color is 5%... Good luck, Dennis

    Comment

    Working...

    Debug Information

    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"