82 Power Antenna - NCRS Discussion Boards

82 Power Antenna

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Mark Luchansky

    82 Power Antenna

    How do I tell what may be wrong with my Power Antenna wo/cb for a 1982 Corvette?

    The antenna is in the upright position. Is it the mast? motor? Am I able to rebuild it?
  • Jack H.
    Extremely Frequent Poster
    • April 1, 1990
    • 9906

    #2
    Re: 82 Power Antenna

    Mast repair kits are listed in several catalogs including Corvette Central ($20-22) for both CB and non-CB power antenna's. Diagnostics and proceedures to replace the mast should be listed in your copy of the shop manual.

    If you can hear the pwr antenna motor turning in response to controls, it's probably a failed mast drive cable that will be repaired with a replacement mast kit. If you hear no motor operation, it's time to find out why (faulty wiring runs and/or burned out drive motor).

    Comment

    • Dave F.
      Expired
      • December 1, 2003
      • 508

      #3
      Re: 82 Power Antenna

      Also, check for a good ground connection at your strap/frame grounding point.

      Comment

      • Joe L.
        Beyond Control Poster
        • February 1, 1988
        • 43193

        #4
        Re: 82 Power Antenna

        Mark-----

        The vast majority of the time, if the problem is actually with the motor assembly, itself, and not connections, grounds, etc., the problem will be a broken mast cable. If so, the repair kits, properly installed, will cure the problem.
        In Appreciation of John Hinckley

        Comment

        Working...

        Debug Information

        Searching...Please wait.
        An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

        Please push the back button and reload the previous window.'
        An unexpected error was returned: 'Your submission could not be processed because the token has expired.

        Please push the back button and reload the previous window.'
        An internal error has occurred and the module cannot be displayed.
        There are no results that meet this criteria.
        Search Result for "|||"