C2 Tail Lamps

[Donald T.]

Hi Guys! I would like to get opinions on repro tail lamps. I checked the archives and there were positive comments about the tail lamps made by Trim Parts. However, I want to see how they compare to originals. Mine have minor pitting and I need to replace the inboards with back up lights for my 65.

Thanks!

[John M.]

Re: C2 Tail Lamps

The Trim Parts tail light assemblies are perfect.. but the gaskets are a little thick making it hard to start the speed nut. You can do it though and you will be happy with them.

[Jack H.]

Re: C2 Tail Lamps

Browse to their web site (www.trimparts.com) and their catalog is on-line with pictures of each of the parts they offer!

[Donald T.]

Re: C2 Tail Lamps

Thanks John! They looked good in the picture, but so do most repros until you hold them side by side with an original.

Thanks!

[Mike Barnard Sr No 36249]

Re: C2 Tail Lamps

I bought mine through them and are very happy with them. I agree the gasket is alittle thick. I took mine off and removed the silicone sealler and replaced it with gasket sealer sparingly and that helped in installing the nuts.