C2 Brake Hose and Crossmember - NCRS Discussion Boards

C2 Brake Hose and Crossmember

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • �RJAN JOHANSSON

    C2 Brake Hose and Crossmember

    Hi
    I wone now if the brake hose and crossmember bushings from Gm today is correct for a -67?
    I buy a set aftermarket brake hoses but I dont think they are correct.
    Best regards.
  • Joe L.
    Beyond Control Poster
    • February 1, 1988
    • 43193

    #2
    Re: C2 Brake Hose and Crossmember

    Orjan-----

    Strictly speaking, the brake hoses and the crossmember cushions (if you're talking about the large end cushions that mount to the frame "sombrero" brackets) that are available today from GM are NOT exactly like the originals used for 1967. However, the GM parts are as close as you're going to get to the originals, since the exact-configuration original parts are not reproduced. Also, I don't think that there's really any huge difference between these parts which are currently available in the aftermarket/reproduction marketplace from the parts currently sold by GM. As far as these parts go, they're about "equally incorrect". Really, though, the differences are quite minor from the original parts.
    In Appreciation of John Hinckley

    Comment

    Working...

    Debug Information

    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"