66 Electrical - NCRS Discussion Boards

66 Electrical

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • John F.
    Very Frequent User
    • July 31, 1999
    • 105

    66 Electrical

    This may be simple but I'm a rank amateur when it comes to electrical. Recently my left hand turn signal stopped working. The ligt comes on but doesn't flash. I knew enought to check the bulb - OK, and the flasher - OK. I've checked the connections to the light and they seem OK. Grounds are all solidly attached. Only thing else I can think of is the turn signal unit itself. any suggestions?

    John Farren
  • John H.
    Beyond Control Poster
    • December 1, 1997
    • 16513

    #2
    Re: 66 Electrical

    Have you checked to see if the bright filaments are working in both the front AND rear lamps? Frequently if one filament dies, the circuit doesn't draw enough current to cycle the flasher. The right turn signal lamps work OK?

    Comment

    Working...

    Debug Information

    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"