QuadraJet Carb Rebuild Question... - NCRS Discussion Boards

QuadraJet Carb Rebuild Question...

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Jeff Schuster

    QuadraJet Carb Rebuild Question...

    Hi All,
    I am rebuilding my carb (1977), and I have a couple of questions for the gurus:
    1) Does the power piston get screwed to bottom, or do I need to bottom it and then back it out a specified amount? If you need, I can e-mail you a pic of the screw in question!
    2) What is the stock setting for the idle needles? When I dismantled the carb, one was backed out 3.25 turns, and the other was backed out 4.25 turns.
    Thanks for any help you can offer! It is greatly appreciated!
    Jeff
  • Robert S.
    Very Frequent User
    • July 31, 2004
    • 377

    #2
    Re: QuadraJet Carb Rebuild Question...

    This might help...




    Rochester Quadrajet Manual
    Bob

    Comment

    Working...

    Debug Information

    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"