1965 396 restoration Engine question - NCRS Discussion Boards

1965 396 restoration Engine question

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Rick R.
    Infrequent User
    • October 22, 2006
    • 5

    1965 396 restoration Engine question

    I had earlier posted a picture of the build sheet on the 1965 BB we are restoring. We have contacted the original owner who states the engine was replaced under warranty because the first 400 or so 65 396 engines were machined with the #3 cylinder under sized by .003, causing cracked rings and eventual failure. He states that Chevy attempted to get all these cars back to replace the engines once the error was found. Can any historians shed light on this? He has the service paperwork for the repair and there was no charge. Thanks, Rick
  • Clem Z.
    Expired
    • January 1, 2006
    • 9427

    #2
    i missed you post but my factory picked up

    65 396 was VIN 114271 and it had no problems except breaking valve springs. these broken springs could have caused a dropped valve and a engine replacement

    Comment

    Working...

    Debug Information

    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"