TEST, picture posting

[Mike N.]

Please let me know if you are able to view it.

Thanks again,

Mike

It works for me.............

[Gary Schisler]

Works fine. *NM*

[Gary C.]

Re: TEST, picture posting

Mike, got your picture on this post just fine. Would work on getting the lip of the stainless a little so it will fold over and catch. I used a Bessey "Duo Clamp", which is a squeese clamp available at Lowe's - to carefully roll over those edges like your photo until the caught. And I do mean carefully, otherwise the stainless will dent. You might have to file a sharper edge on the post to have an edge for the stainless to catch on as well as making the lip of the stainless a little wider by rounding it out to catch on the post lip. Good luck, Gary....