66 sway bar - bowed or not bowed

[Hal J.]

[Joe L.]

Re: 66 sway bar - bowed or not bowed

Hal-----

Your picture didn't work, so I can't see what your sway bar looks like. However, the longitudinal section of the 65-67 rear stabilizer bar is more-or-less "straight". The 69-74 bar, which became SERVICE for earlier applications, has an offset in the longitudinal section.

[Kevin M.]

Re: 66 sway bar - bowed or not bowed

Your link was to a page not picture.

Kevin

[Kevin M.]

Re: 66 sway bar - bowed or not bowed

1st Picture

[Wayne M.]

Looks OK to me

Hal, this shot is of a late '65 L78. As Joe L. says there is no off-set to the rear on the lateral run between the bushings.

Although your pics do not show the 90 degree corners, where the '68+ off-set occurs, it appears that you have the correct 9/18" dia. rear sway bar ('65 thru '67 BBs).

[Hal J.]

Thank you Mr. Muldoon

I will check the lower side as Mr. Lucia noted. Didn't even look at it that way. And thank you Mr. Muldoon for helping with the picuture. Learned yet another thing today. Hal

[Joe L.]

Re: Thank you Mr. Muldoon

Hal-----

As has been noted, the bar you have is the correct one. You need not check it out any further.