Tweet
The harness cable for the electric window is chafed and at least one wire is broken on the driver side door near the "conduit assembly", the tubular cable guide on the front door edge. The break is just inside the A-pillar where the conduit ends.
Access is very limited and there is not much slack in the harness.
What is the easiest way to make a reliable repair on a driver car. I would rather not replace the whole electric window harness at this time.
Access is very limited and there is not much slack in the harness.
What is the easiest way to make a reliable repair on a driver car. I would rather not replace the whole electric window harness at this time.