58 Deck Lid /Hinge Problem - NCRS Discussion Boards

58 Deck Lid /Hinge Problem

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Leroy Lemmerhirt

    58 Deck Lid /Hinge Problem

    Currently in early stages of 58 restoration---just installed both rear fenders/lower rear panels---the deck lid(trunk)sit very high---There are no shims under the hinges at the floor or the hinge to panel points---help--I have tried every adjustment I can think of---with the lid closed, you can push down at the hinge locations, and move the lid down probably 1/4 inch.Has any one else had this problem??
    Thanks for any help/advice.
    Leroy NCRS 31700
Working...

Debug Information

Searching...Please wait.
An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

Please push the back button and reload the previous window.'
An unexpected error was returned: 'Your submission could not be processed because the token has expired.

Please push the back button and reload the previous window.'
An internal error has occurred and the module cannot be displayed.
There are no results that meet this criteria.
Search Result for "|||"