68 bb water pump bolt question - NCRS Discussion Boards

68 bb water pump bolt question

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Brandon T.
    Very Frequent User
    • October 23, 2008
    • 872

    68 bb water pump bolt question

    Put the water pump on my 68 l36 the other night. Cleaned up the original bolts and re-used them. However, one bolt (the lower passenger side bolt) isn't correct I learned this after I went to put them hand tight and it bottomed out.

    I noticed in the bag I tagged it with it had a washer on it. Someone in the past had put a longer bolt here and used a washer to compensate for it being longer.

    So, with my gaskets already with sealant and on and the other bolts in and hand tight I went ahead and pulled the bolt out put the washer on and torqued them.

    I now want to remove that bolt and buy a correct one from paragon.....problem is their site doesn't describe them that well..

    which on this link would be correct for a 68 427 water pump lower passenger side bolt?

    http://corvette-paragon.com/catalog/...A-0EE17A434E2B

    http://corvette-paragon.com/catalog/...5-D260FE3613CF

    http://corvette-paragon.com/catalog/...0-B5630F9C8821

    could buy the kit and use just the one bolt from it but I'd rather just buy the one I need
    http://corvette-paragon.com/catalog/...4-AF2FF28A38FC
Working...

Debug Information

Searching...Please wait.
An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

Please push the back button and reload the previous window.'
An unexpected error was returned: 'Your submission could not be processed because the token has expired.

Please push the back button and reload the previous window.'
An internal error has occurred and the module cannot be displayed.
There are no results that meet this criteria.
Search Result for "|||"