turn signal housing - NCRS Discussion Boards

turn signal housing

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Guy M.
    Very Frequent User
    • November 1, 1993
    • 499

    turn signal housing

    I have reassembled the housing correctly but it still really seems stiff after lubricating all the moving parts as shown in the Calcagno artical. The switch seems sluggish from the years and Im nor sure how :free: its supposed to move. None of the parts seem to be worn. Can I put some lithium grease on the sliding switch? Thanks as always.

    Also, any info on how all the horn parts are to lay in there correctly. I cant find a picture.
Working...

Debug Information

Searching...Please wait.
An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

Please push the back button and reload the previous window.'
An unexpected error was returned: 'Your submission could not be processed because the token has expired.

Please push the back button and reload the previous window.'
An internal error has occurred and the module cannot be displayed.
There are no results that meet this criteria.
Search Result for "|||"