57 radiator lower core support - NCRS Discussion Boards

57 radiator lower core support

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Susan M.
    Expired
    • January 10, 2011
    • 63

    57 radiator lower core support

    I am restoring my 57 and I am looking to replace my radiator core. The original radiator has a strap that goes around the core and attaches to the top of the radiator to support the core. There's a section on the left and right and another section the lower part of the core. The left and right sections are spot welded to the lower section as well as the top. My lower sections cannot be saved and I can't seem to find a replacement part. I have access to another radiator that I can pull apart and use the lower strap from that radiator but the labor costs might make it not worth the effort... I dont dare try this stuff on my own.. Since this section does not show when installed I could go without the lower section but that is offending my sense of bringing the car back as it was. Any advice? Anyone know where I might find this lower support strap?? thank you thank you...
  • Mike M.
    NCRS Past President
    • May 31, 1974
    • 8365

    #2
    Re: 57 radiator lower core support

    i doubt anyone is repo-ing the lower strap. i'd go junkyarding with a measuring tape and find a 50's GM radiator with similar dimensions or larger dimensions(which could be shortened to accomidate your 57 vette core). most competent radiator shops can handle the job. good luck,mike

    Comment

    • Steven B.
      Extremely Frequent Poster
      • June 30, 1982
      • 3976

      #3
      Re: 57 radiator lower core support

      Susan, might try Grossmueller's and Paragon Vintage.

      Good Luck!

      Steve

      Comment

      • Susan M.
        Expired
        • January 10, 2011
        • 63

        #4
        Re: 57 radiator lower core support

        Originally posted by Mike McCagh (14)
        i doubt anyone is repo-ing the lower strap. i'd go junkyarding with a measuring tape and find a 50's GM radiator with similar dimensions or larger dimensions(which could be shortened to accomidate your 57 vette core). most competent radiator shops can handle the job. good luck,mike
        I think you are right. thanks!

        Comment

        • Susan M.
          Expired
          • January 10, 2011
          • 63

          #5
          Re: 57 radiator lower core support

          Originally posted by Steven Brohard (5759)
          Susan, might try Grossmueller's and Paragon Vintage.

          Good Luck!

          Steve
          Thanks Steve, Paragon has something without a photo that might be right. I will give them a call. Regards, Susan

          Comment

          Working...

          Debug Information

          Searching...Please wait.
          An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

          Please push the back button and reload the previous window.'
          An unexpected error was returned: 'Your submission could not be processed because the token has expired.

          Please push the back button and reload the previous window.'
          An internal error has occurred and the module cannot be displayed.
          There are no results that meet this criteria.
          Search Result for "|||"