1954 6-Volt to 12-Volt Conversion Requirements - NCRS Discussion Boards

1954 6-Volt to 12-Volt Conversion Requirements

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • John L.
    Expired
    • February 1, 2005
    • 207

    1954 6-Volt to 12-Volt Conversion Requirements


    ITEMS NOT REQUIRING CHANGING BUT WORK FOR 6 OR 12 VOLT SYSTEMS
    Courtesy light switches
    Brake light switch
    Neutral safety switch (on transmission)
    Turn signal switch (in column)
    Ignition switch
    Dimmer switch
    Wiring harness

    Oil pressure gauge - mechanical
    Amp meter

    Starter solenoid
    Points and condenser

    ITEMS REQUIRING CONVERSION OR SPECIFIC 12 VOLT COMPONENTS
    Generator conversion
    Voltage regulator
    Ignition coil
    Parking brake flasher (tung sol 642?)
    Lamps
    Clock conversion
    Cigarette lighter
    Positive battery cable



    2) Horns and Horn Relay - If keeping with the 6 volt horns can also keep the 6 volt relay since horn is only for short bursts and not a continuous current draw. Should a 12 volt relay be installed?
    3) Heater Fan and Switch - If changing to a 12 volt fan motor will there also be the need to change the resistor on the fan switch?




    Thanks,
Working...

Debug Information

Searching...Please wait.
An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

Please push the back button and reload the previous window.'
An unexpected error was returned: 'Your submission could not be processed because the token has expired.

Please push the back button and reload the previous window.'
An internal error has occurred and the module cannot be displayed.
There are no results that meet this criteria.
Search Result for "|||"