GM part no. for rubber boot (C3)

[mark34178]

Would like the GM part no. for the rubber boot that fits over the headlight
actuator rod. This boot is designed to keep out dirt and is not a vacume seal. Have seen the boot in many corvette supplier catalogs but would
like the GM no.
It is shown on page 31 of the February issue of Vette magazine.

[Joe L.]

Re: GM part no. for rubber boot (C3)

Mark-----

Neither the boot nor the seal are now or were ever available from GM as a seperate part. The seals available from Corvette vendors are an aftermarket-sourced part.