THIRD ARM BEARING - NCRS Discussion Boards

THIRD ARM BEARING

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Joe D.
    Expired
    • April 30, 2002
    • 382
    #1

    THIRD ARM BEARING

    ANYONE KNOW EHERE I CAN BUY AN AMERICAN MADE 3RD ARM BEARING FOR MY 1961. THANKS, JOE
    Tags: None
      • Top
    • John M.
      Expired
      • January 1, 1999
      • 1553
      #2
      Re: THIRD ARM BEARING

      Joe,
      I usually just go to my local industrial bearing house. They keep them on the shelf at about $45 each. Sorry I cant give you the Bearing #, but I have it at work. Just take your old one and they can cross the number.

      Regards, John McGraw
        • Top

        Comment

        • John M.
          Expired
          • January 1, 1999
          • 1553
          #3
          P.S.

          Joe,
          I also do not install them open on the back side like the originals. They were originally left open and the cavity was packed with grease, but I belive that modern double sealed bearings will last a lifetime!

          Regards, John McGraw
            • Top

            Comment

            • Roy Braatz
              #4
              Re: P.S.

              Joe is right ,ANY bearing that shows a number can be gotten at a Bearing company even a 37 Ford Columbian two speed rear end bearing.
                • Top

                Comment

                • Craig S.
                  Extremely Frequent Poster
                  • June 30, 1997
                  • 2471
                  #5
                  Re: P.S.

                  And from my experience.....MUCH cheaper to boot!...Craig
                    • Top

                    Comment

                    Previous template Next
                    Working...

                    Debug Information

                    Searching...Please wait.
                    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                    Please push the back button and reload the previous window.'
                    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                    Please push the back button and reload the previous window.'
                    An internal error has occurred and the module cannot be displayed.
                    There are no results that meet this criteria.
                    Search Result for "|||"