C3 - 69 AC assembly question - NCRS Discussion Boards

C3 - 69 AC assembly question

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • John A.
    Expired
    • August 31, 2002
    • 172

    C3 - 69 AC assembly question

  • John H.
    Beyond Control Poster
    • December 1, 1997
    • 16513

    #2
    Re: C3 - 69 AC assembly question

    John -

    The blackout was done in the Paint Shop, before any A/C-Heater parts were installed; the blower/evap unit was indeed a complete assembly from Harrison, and was installed as a single unit on the Trim Line after paint. Any black showing on the housing is a vinyl plastisol-based sealer to prevent (or repair) water leaks.

    Comment

    • John A.
      Expired
      • August 31, 2002
      • 172

      #3
      Re: C3 - 69 AC assembly question

      Thanks - Help paint a better picture of how it should be restored!

      Comment

      Working...

      Debug Information

      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"