SS Brake line vendor

[Jason Stavropoulos]

Anyone know of a good stainless steel brake line vendor? By good I mean one that reputedly sells kits that actually fit the car.
Thanks in advance
Jason

[Dave Schenk]

Re: SS Brake line vendor

I used a local guy in Ohio, Rudy: Fax number 330-339-6595, cell 330-327-3474,
Office 330-339-6054. He completed the SS brake system on my 65 a year ago, worked out great. Dave #37165

[Mike M.]

Try Classic tube

http://www.classictube.com

[Stephen L.]

Re: SS Brake line vendor

I recently purchased a set of SS brake lines for a 67 NON power brake car from Crane Corvette Supply. They fit perfectly. The only thing that is annoying is the front to back line must be folded for shipment. This was relatively easy to straighten to the original configuration..... $110 + s/h.

[Jason Stavropoulos]

Re: Try Classic tube

I did try Classic Tube, that is my reason for being here. Front to back line was too long. Left to right line was also too long and the bends seemed to be in all the wrong places.

[Mike M.]

They did mine and no problems *NM*

[Jason Stavropoulos]

Re: They did mine and no problems

Did they actually install them? If they did, then I can see how they fit like a glove as it is quite easy to cut brake lines and put a flare on the end if it's too long.

[Mike M.]

Installed Them Myself *NM*

[Mark williams]

Re: SS Brake line vendor

muskegon brakes in Michigan have real nice sets, I have bought 2 sets and they fit perfect on my 69 and 72