Part ID help needed

[Bill Lloyd #33481]

I have a radio and intake manifold that seem to be Corvette parts. My part number books do not list them. The radio looks to be out of a 78-82 car, PN 16009960 from the Delco sticker on the side and the intake manifold is Alum. and is PN 14057053 and is a dual plane 4BC quadrajet type. Thanks in advance for your help.

Bill

[David H.]

Re: Part ID help needed

14057053 is identified as a 305/350 late model aluminum intake at

http://www.chevymania.com/casting/INTAKE.HTM

14057054 is for 1980 305/350 Corvette.

Didn't find radio information.

[Wayne C.]

Re: Part ID help needed

I can't confirm the radio number, but I believe the same radios were used across all Chevrolet (if not GM) car lines in that timeframe, so it is not unique to a Corvette.

[Jack H.]

Re: Part ID help needed

I think you're right, Wayne.... When ETR (electronic tuning receiver) sets were introduced in the early 80's the packaging became standardized across Chevy lines. On why it's hard to find radio PN's, the standard Corvette/Chevy Parts & Accessories Manuals generally left that information up to Delco Remy to document in separate books. You CAN get the applicable PN's by going to the factory AIM books and looking things up one year at a time....