Dash restoration - NCRS Discussion Boards

Dash restoration

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Dan Tewell

    Dash restoration

    Who does good gauge restoration? I've used a company called "Clocks By Roger" before and had good results. Are they still around? Any thoughts would be appreciated.
    Dan
  • Harry Sadlock

    #2
    Re: Dash restoration

    Clocks by Roger are still around. I am also interested in you question as I am getting ready to do my cluster. Their number is 800-752-3421. Their WEB is www.corvetteclocks.com.

    Comment

    • John M.
      Expired
      • January 1, 1999
      • 1553

      #3
      Re: Dash restoration

      I would never send him any more work. His price was high, the turnaround time was high and the customer service poor. Just my opinion, and I am sure others do not share this opinion, but I would check the archives for other's comments!

      Regards, John McGraw

      Comment

      • Jim K.
        Very Frequent User
        • August 31, 2000
        • 554

        #4
        Re: Dash restoration

        I just got my 61' guages back from Corvette Specialties of Maryland and I must say, I was quite impressed by the quality, service and price. They actually talked me out of certain work that was unnecessary (for my driver use). Turn-around time was two weeks, and they were outstanding on the phone and e-mail with questions, answere, reccomendations and advice. The estimate given to me up front was right on target too!!! As for the quality, I've bench tested and all is well, and they look awesome!!! Just my $0.02 The clock is on its way to Clockworks and I expect it back next week. Jim

        Comment

        • Dan Tewell

          #5
          Re: Dash restoration

          Jim, Do you have a number, e-mail or web address for them?

          Comment

          • Jim K.
            Very Frequent User
            • August 31, 2000
            • 554

            #6
            Check your E-mail *NM*

            Comment

            • George D.
              Very Frequent User
              • August 31, 2000
              • 225

              #7
              Re: Dash restoration

              I had the original clock from my 69 rebuilt by Roger. After a year it quit working. I asked him about it and he smugly replied that was about how long they would last. I don't recommend him.

              Comment

              • Mark F.
                Expired
                • March 1, 2002
                • 174

                #8
                Re: Dash restoration

                Roger Scott (no relation to Clocks by Roger) operates Corvette Instrument Servicein Florida. Just got my '65s cluster and glove box door back from him. Almost didn't recognize the beautiful pieces that came back as the same junk I sent him, all for a a very reasonable price (much less than I expected). Recommend him highly.




                Comment

                • Jeff A.
                  Expired
                  • December 1, 2001
                  • 95

                  #9
                  Re: Dash restoration

                  I had D&M Restorations in South Carolina doe my clock and Ammeter. Mike was attentive and turned them right around for about the going price of the catalogs. They have a website.

                  Comment

                  • Dan Tewell

                    #10
                    Re: Dash restoration

                    Does any one have a web address for D&M Restorations?

                    Comment

                    • Donald L.
                      Very Frequent User
                      • September 30, 1998
                      • 461

                      #11
                      Re: Dash restoration

                      www.dandmrestoration.com

                      Comment

                      Working...

                      Debug Information

                      Searching...Please wait.
                      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                      Please push the back button and reload the previous window.'
                      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                      Please push the back button and reload the previous window.'
                      An internal error has occurred and the module cannot be displayed.
                      There are no results that meet this criteria.
                      Search Result for "|||"