C1 FAN TO WATERPUMP BOLTS - NCRS Discussion Boards

C1 FAN TO WATERPUMP BOLTS

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Joe D.
    Expired
    • April 30, 2002
    • 382

    C1 FAN TO WATERPUMP BOLTS

    Does anyone know what the headmarks should be for the bolts that connect the fan to the waterpump on a early (100451) 1961, 283,245hp? WB,S, or TR?Thanks, Joe DeLuca #37862
  • Dennis A.
    Expired
    • April 30, 1999
    • 1010

    #2
    Re: C1 FAN TO WATERPUMP BOLTS

    Joe . . .

    3 bolts with "TR" and one stud for the Generator brace.

    Comment

    • John M.
      Expired
      • January 1, 1999
      • 1553

      #3
      Re: C1 FAN TO WATERPUMP BOLTS

      Joe,
      On my 60 which has no fan clutch and has the aluminum spacer, The bolts are TR head marked, but are also grade 8 marked as well. I dont know if anyone produces the correct long bolts with the correct grade marking. The Paragon # 4957 has about the correct head appearance, but the bolt is the shorter bolt that is used without the aluminum spacer.

      Regards, John McGraw

      Comment

      Working...

      Debug Information

      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"