C-3 Ball joint boot - NCRS Discussion Boards

C-3 Ball joint boot

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • John D.
    Expired
    • August 31, 2001
    • 280

    C-3 Ball joint boot

    Has any one heard or attempted to repair an original ball joint boot? Is there a glue or other compound that could be used to seal a 1/4" long tear?

    Thanks in advance for any advice, John
  • Mike McKown

    #2
    Re: C-3 Ball joint boot

    John:

    If you can get the boot clean enough, some formulas of super glue will work.

    Mike

    Comment

    • Rob A.
      Expired
      • December 1, 1991
      • 2126

      #3
      Re: C-3 Ball joint boot

      Use a thick, gap-filling instang glue from a hobby shop, not a hardware store. It gives a little working time and will fill a gap and hold permanantly. You can sand down any shiny areas after it dries. I've done it and it works well

      Comment

      Working...

      Debug Information

      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"