67 TRAINLING ARM FINISHES - NCRS Discussion Boards

67 TRAINLING ARM FINISHES

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Rob A.
    Expired
    • December 1, 1991
    • 2126

    67 TRAINLING ARM FINISHES

    I would like to confirm the correct finish for the spindle supports as well as the brake caliper mounting flange behind it is semi-gloss black. I would also like to know the correct finish for the spindle flange on the inside that connects to the half shalf flange, as well as the parking brake lever where the cable attaches. I have the judging manual but would I would like to make sure before finishing these areas.
Working...

Debug Information

Searching...Please wait.
An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

Please push the back button and reload the previous window.'
An unexpected error was returned: 'Your submission could not be processed because the token has expired.

Please push the back button and reload the previous window.'
An internal error has occurred and the module cannot be displayed.
There are no results that meet this criteria.
Search Result for "|||"