C3 PO1's vs PO2's

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • jim34671

    #1

    C3 PO1's vs PO2's

    Is there anything unique/different to the PO1 wheelcovers for 1968 as compared to the PO2's of 69 and later?
    Thx
  • Joe L.
    Beyond Control Poster
    • February 1, 1988
    • 42936

    #2
    Re: C3 PO1's vs PO2's

    Jim-----

    Absolutely nothing that I'm aware of. Besides, the part numbers for the wheel covers were the same-----GM #3923630.
    In Appreciation of John Hinckley

    Comment

    • jim34671

      #3
      Re: C3 PO1's vs PO2's

      That's what I thought too.
      Thx Joe

      Comment

      • Robert C.
        Expired
        • December 1, 1993
        • 1153

        #4
        Re: C3 PO1's vs PO2's

        There are differences between the PO1s and 2s that were the original equipment and the over the counter GM replacements. The center chrome hub on the replacements are about a 16th of an inch smaller in diameter.

        Comment

        Working...
        Searching...Please wait.
        An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

        Please push the back button and reload the previous window.'
        An unexpected error was returned: 'Your submission could not be processed because the token has expired.

        Please push the back button and reload the previous window.'
        An internal error has occurred and the module cannot be displayed.
        There are no results that meet this criteria.
        Search Result for "|||"