If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You must be an NCRS member
before you can post: click the Join NCRS link above to join. To start viewing messages,
select the forum that you want to visit from the selection below.
I need to purchase a master cylinder rebuild kit for a non-power break 1965, casting # 2225032. NAPA list a kit for 1963 to 1965 Corvette, casting # 2225032 with a 7/8" bore. The JG list the cylinder as a 1" bore. Could some one please clarify?
I hope I'm not telling you wrong. I believe the drum brake cars, 63-67 used the 7/8ths master cylinder. The disc brake used 1 inch. NAPA should not have a problem supplying you with the correct kit if they know which system you have.
If you have disc brakes, without power, you should have the master cylinder with the large reservoir. Much larger than the '63/64.
I broke down the master cylinder and it has a 1" bore. NAPA must have been looking at 63, 64, and early 65 with drum brakes. They looked up a 66 and it had a 1" bore.
We use cookies to deliver our services, and to analyze site activity. We do not share or sell any personal information about our users. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Tweet
Comment