Dampner for SB

[Steve D.]

I am reassembling a very non original 327 from my 63 convertible [65 block, 67 heads (462), 64? intake (3844461), domed pistons (L2166N), LT-1 cam ]. Which balancer would be appropriate?

Steve

[Dave Cote NCRS#38525]

Re: Dampner for SB

Steve,

I would think that the 8 inch 350 horse dampner would work just fine. Just make sure that whatever dampner you choose, that you get the correct timing cover with the timing tab in the correct location.

[Duke W.]

It's "damper" *NM*

[Dave Cote NCRS#38525]

Thanks for the Correction....... *NM*

[Michael W.]

[Dave Cote NCRS#38525]

[Bill Braun 33186]

Re: And it's "you're", not "your". *NM*

[Michael W.]

[Bill Braun 33186]

LOL! *NM*

[Mike Baker]

[Michael W.]

[Mike Baker]

I stand corrected - Thanks *NM*

[Bill Braun 33186]

Yup, you're correct; Mike (W)

and the new German rules have made it official.

Your eye for detail (and fear of SWMBO's wrath) is obviously unabated



btdf

[Al Corelli]

Isn't this the wrong spot for this sort of banter?

I thougt this place was for technical posts only?

This is unbearable.

AC
whereisthemanagement?

[John H.]

Re: Isn't this the wrong spot for this sort of ban

They're looking for a guy in a Miata (with the top down) headed back from Manhattan