C2 63 Seat Belt Reinforcement Corner - NCRS Discussion Boards

C2 63 Seat Belt Reinforcement Corner

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Harry Sadlock

    C2 63 Seat Belt Reinforcement Corner

    I need to replace my LH outer seat belt reinforcement corner. I took a brief look and it looks impossible to replace with the body on. Any guidance would be appreciated.

    Harry.
  • Gary Kemp

    #2
    Re: C2 63 Seat Belt Reinforcement Corner

    Harry, I just did this last week. The nut I got from Volunteer Products is slim (maybe 3/16" thick). I bent a thin 11/16 open end wrench and was able to install with a little patience. I used some weatherstrip adhesive to hold the nut to the wrench to get it started. The other belts all had the nut welded in place and therefore not a problems. I was going to get a cheap china made wrench and grind it down but found an old one laying around wanting to be used.

    Good luck!
    Gary

    Comment

    Working...

    Debug Information

    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"