C2-56 coil location - NCRS Discussion Boards

C2-56 coil location

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Joe Pennington

    C2-56 coil location

    On a 56 with the single carburetor and vacuum advance dist. Is the coil mounted on the right hand ignition shield bracket or is it mounted on the intake manifold (drivers side)? Thanks for your help. Joe
  • Mike M.
    NCRS Past President
    • May 31, 1974
    • 8365

    #2
    Re: C2-56 coil location

    believe you need the figure 8 bracket that is available as repro. the bracket clamps to the distributor and the coil slips down in the smaller opening in the figure 8.mike

    Comment

    • Joe Pennington

      #3
      Re: C2-56 coil location

      Mike, thanks for the info on the figure "8" coil holder. I had seen the listing in the catalogs but didn't understand the application.

      Comment

      Working...

      Debug Information

      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"