C-2 fuel tank - NCRS Discussion Boards

C-2 fuel tank

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Rainer S.
    Very Frequent User
    • May 31, 2003
    • 468

    C-2 fuel tank

    I am restoring a 63 SWC. The car has a new fuel tank, GM replacement, based on the stickers I found on the tank. Made from galvanized steel, with all the correct indentations. But it does not have the "Anderson" logo stamped next to the bottom sending unit, as the originals had.It was made in USA. Will I loose judging points,since it does not have the logo or should I replace the tank with a reproduction unit ,with the logo ?
  • Duke W.
    Beyond Control Poster
    • January 1, 1993
    • 15610

    #2
    Re: C-2 fuel tank

    The area around the sending unit cannot be seen during flight judging due to the spare tire housing blocking the view, but the sides can be seen and I recall the JG says there is a detectable geometry difference between the original and later GM replacements, so that will cost a few points.

    Duke

    Comment

    Working...

    Debug Information

    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"