C2 Front Suspension Torque Spec - NCRS Discussion Boards

C2 Front Suspension Torque Spec

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • George C.
    Expired
    • November 1, 2001
    • 568

    C2 Front Suspension Torque Spec

    I am putting the front suspension back together after a total rebuild and can not find the torque spec for the top bolt which holds the backing plate and the caliper bracket to the front spindle. AIM has nothing as this was installed as a sub assembly, and the 63 service manual refers to the brake anchor pin, drum brakes. The 65 manual has no additional information, Can someone tell me the right torque?

    Thanks as always,

    George
    #36809
  • John H.
    Beyond Control Poster
    • December 1, 1997
    • 16513

    #2
    Re: C2 Front Suspension Torque Spec

    George -

    75 lb-ft. per the '67 Service Manual.

    Comment

    • George C.
      Expired
      • November 1, 2001
      • 568

      #3
      Re: C2 Front Suspension Torque Spec

      Jack,

      Thanks for the response. All I could find was reffering to the Brake Anchor Pin, and I wasn't sure if it should be something different.

      Comment

      Working...

      Debug Information

      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"