57' Ignition Shielding - NCRS Discussion Boards

57' Ignition Shielding

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Bob A.
    Very Frequent User
    • April 1, 2003
    • 172

    57' Ignition Shielding

    I understand the reproduction shielding available is not "correct". Are there any other suggestions as where to find, the cost of, or what to do about the shielding dilemma?

    Thanks and Best Wishes!

    Bob
  • John M.
    Expired
    • January 1, 1999
    • 1553

    #2
    Re: 57' Ignition Shielding

    Bob, You will just have to keep an eye on the Driveline and Ebay. Originals are getting harder to find and a lot of the NOS ones listed out there are the service replacements with the long front skirts that were used on 61-62 cars. The repro shields don't judge that bad, and if an original can't be found, then they would not be a bad choice. I have been looking for one for my 60 for a while and will probably end up going to Hershey with a repro since I can't find one. People who live up in the midwest close to Carlisle and Blommington Gold swap meets are at a decided advantage to those of us who live way down here at the edge of civilization in Texas.

    Regards, John McGraw

    Comment

    Working...

    Debug Information

    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"