67 427 c60 heater hose clamps - NCRS Discussion Boards

67 427 c60 heater hose clamps

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Robert M.
    Expired
    • May 31, 2000
    • 42

    67 427 c60 heater hose clamps

    How many heater hose clamps that are bolted through the inner fender were used on a 67 427 with c60? And what is the location in relationship to the compressor? Thanks
  • Brandon K.
    Expired
    • April 1, 1997
    • 474

    #2
    Re: 67 427 c60 heater hose clamps

    I believe there were two, same as the small block. the locations are shown in the AIM. The rear one had two dimples in the glass where the holes are to be drilled, and the front one is positioned a little forward of the dimple marks.

    Comment

    Working...

    Debug Information

    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"