C2 Headlight Motor Switch - NCRS Discussion Boards

C2 Headlight Motor Switch

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • John Lokay

    C2 Headlight Motor Switch

    The headlight motor switch in my 66' is not working right and I would like some input on how to fix it. When I push the tab, either to open or close the headlight buckets, I have to also at the same time take my other hand and move the wires around that come out the back of it to get the headlight buckets to start to move. Is there some kind of loose connection within the switch that needs to be tightened up?
  • Mike M.
    NCRS Past President
    • May 31, 1974
    • 8365

    #2
    Re: C2 Headlight Motor Switch

    sounds like the posts in the switch +/or the harness terminals are oxidized. clean them up (i use metal prep , a mild phosphoric acid, to clean with a brass wire brush then flood copiously with water then coat with a silicone dielectric paste(3-M or AC Delco supplies)Good luck, mike

    Comment

    • Wayne W.
      Extremely Frequent Poster
      • April 30, 1982
      • 3605

      #3
      Re: C2 Headlight Motor Switch

      Many times the clip that holds the switch assembly together is broken.

      Comment

      • Joe C.
        Expired
        • August 31, 1999
        • 4598

        #4
        Re: C2 Headlight Motor Switch

        Is it a reproduction switch?? If it is, then there are some quality issues to deal with. I had to disassemble and "tweak" my brand new repop switch to get it to work correctly.

        Joe

        Comment

        Working...

        Debug Information

        Searching...Please wait.
        An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

        Please push the back button and reload the previous window.'
        An unexpected error was returned: 'Your submission could not be processed because the token has expired.

        Please push the back button and reload the previous window.'
        An internal error has occurred and the module cannot be displayed.
        There are no results that meet this criteria.
        Search Result for "|||"