1967 3x2 carb details ?? - NCRS Discussion Boards

1967 3x2 carb details ??

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Marty Hugney

    1967 3x2 carb details ??

    I need to know if original 1967 3x2 tri-power carbs (secondaries) 3659 had an angle cut vent tube installed in the front hole of the air horn. I have gotten conflicting information on this.

    The 1967 Chevrolet Chassis Overhaul Manual has pictures of the secondary carbs with the angled vent tubes. I have two original carbs with angled vent tubes. I also have an early 1967 Chev Corvette advertisement called DEUCESWILD that shows a picture of the carbs with the angled vent tubes.

    Yet, other people have said they have original carbs without the vent tubes.

    Does anyone know which is correct?? With or without the angle vent tube for the secondary carbs. I know the primary carb 3660 did NOT have the vent tube.

    Any help is much appreciated.
    Thanks in advance and feel free to email me or respond on this site.
    Marty
  • Bill Becker

    #2
    Re: 1967 3x2 carb details ??

    Marty,

    I cannot speak for all, but my secondaries, which are dated 6B4 are flat (horizontal). I have sent you a pic.

    Bill Becker

    Comment

    Working...

    Debug Information

    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"