C1 oil filter cannister - NCRS Discussion Boards

C1 oil filter cannister

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Jon S.
    Expired
    • November 1, 1992
    • 202

    C1 oil filter cannister

    I finally found a 6 3/4 oil filter cannister at the local bone yard. I found it on a chevelle. When looking at the internal structure there is a bell-shaped sheet metal retainer rather than a washer to push the filter up. The spring is crimped on the filter side of the metal retainer that holds everything in place. Is this correct for my 62? I assume it will work. At least the bolt doesn't fall out. Thanks in advance!
    Best regards, Jon
  • mikemccagh

    #2
    Re: C1 oil filter cannister

    what you got at the bone yard is what you need .mikie

    Comment

    • Jon S.
      Expired
      • November 1, 1992
      • 202

      #3
      Thanks Mike *NM*

      Comment

      Working...

      Debug Information

      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"