Courtesy Light Problem

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Gary A.
    Frequent User
    • June 1, 2001
    • 86

    #1

    Courtesy Light Problem

    I recently installed courtesy light door swithches in my 1959. The switches were purchased from paragon. I have everything wired correctly but cannot get the lights to operate. The car was not originally equipped with this option. The wires are there from the original harness for the door switches and the light. What am I missing.
  • roy braatz

    #2
    Re: Courtesy Light Problem

    Ground???????????

    Comment

    • Eugene B.
      Very Frequent User
      • June 1, 1988
      • 710

      #3
      Re: Courtesy Light Problem

      Gary,
      I believe that the first thing that I would do is to check for voltage at the back of the door switch. If no voltage is present, you'll need to get a wiring diagram and follow the wire back to the fuse panel. (Be sure that you have a good fuse in the panel). Hope that this helps.

      Gene

      Comment

      Working...
      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"