I have several questions regarding the proper configuration of the various clips and brackets that attach to the intake manifold of a 1964 L75 engine.
1. Does the clip that holds the crankcase vent tube that runs from the oil fill to the back of the carb attach to the 2d intake mount bolt from the rear on the passenger side?
2. Does the clip that holds the vacuum advance line attach to the third intake mount bolt from the rear on the passenger side?
3. There is a boss, drilled and tapped, that faces the front of the car, on front edge of the intake manifold, to the right of the oil inlet. What mounts here, if anything?
4. There is a boss, drilled and tapped, straight down on the top of the manifold, driver's side, just forward of the 2d intake manifold bolt from the rear. This (incorrectly) had a bracket mounted to it with the accelerator return spring. Is anything supposed to be mounted here?
Thanks!
1. Does the clip that holds the crankcase vent tube that runs from the oil fill to the back of the carb attach to the 2d intake mount bolt from the rear on the passenger side?
2. Does the clip that holds the vacuum advance line attach to the third intake mount bolt from the rear on the passenger side?
3. There is a boss, drilled and tapped, that faces the front of the car, on front edge of the intake manifold, to the right of the oil inlet. What mounts here, if anything?
4. There is a boss, drilled and tapped, straight down on the top of the manifold, driver's side, just forward of the 2d intake manifold bolt from the rear. This (incorrectly) had a bracket mounted to it with the accelerator return spring. Is anything supposed to be mounted here?
Thanks!
Comment