1973 Inner Fender Dust Shields - NCRS Discussion Boards

1973 Inner Fender Dust Shields

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Tim Keeler

    1973 Inner Fender Dust Shields

    Can anyone recommend a supplier(s) of correct inner fender dust shields ? I replaced the torn originals several years ago from a mass Corvette parts supplier, these have a thickness that can be compared to a heavy duty mud flag for a semi. The original thickness is about 1/16". I'd like to get exact repros or excellent originals. Any thoughts ? Thanks, Tim # 26883
  • Jack H.
    Extremely Frequent Poster
    • April 1, 1990
    • 9906

    #2
    Re: 1973 Inner Fender Dust Shields

    Haven't seen any problems with Paragon/C-Central/Dr. Rebuild and suspect you might still be able to get from/through Mr. Goodwrench. Have you tried?

    Comment

    • Jack H.
      Extremely Frequent Poster
      • April 1, 1990
      • 9906

      #3
      Re: 1973 Inner Fender Dust Shields

      Haven't seen any problems with Paragon/C-Central/Dr. Rebuild and suspect you might still be able to get from/through Mr. Goodwrench. Have you tried?

      Comment

      • Joe L.
        Beyond Control Poster
        • February 1, 1988
        • 43193

        #4
        Re: 1973 Inner Fender Dust Shields

        Jack----

        The shields are still available from General Motors under the part numbers 3947933 (left) and 3947934 (right). However, although available under the original part numbers, the material used for the shields is different. The current material is slightly thicker than the originals and has a different surface configuration. I've found the Dr. Rebuild repros to be much closer to original.
        In Appreciation of John Hinckley

        Comment

        • Joe L.
          Beyond Control Poster
          • February 1, 1988
          • 43193

          #5
          Re: 1973 Inner Fender Dust Shields

          Jack----

          The shields are still available from General Motors under the part numbers 3947933 (left) and 3947934 (right). However, although available under the original part numbers, the material used for the shields is different. The current material is slightly thicker than the originals and has a different surface configuration. I've found the Dr. Rebuild repros to be much closer to original.
          In Appreciation of John Hinckley

          Comment

          Working...

          Debug Information

          Searching...Please wait.
          An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

          Please push the back button and reload the previous window.'
          An unexpected error was returned: 'Your submission could not be processed because the token has expired.

          Please push the back button and reload the previous window.'
          An internal error has occurred and the module cannot be displayed.
          There are no results that meet this criteria.
          Search Result for "|||"