c1 wiper motor continued - NCRS Discussion Boards

c1 wiper motor continued

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • david walsh

    c1 wiper motor continued

    I now have opened up the motor and everything looks good and I can manually shut off the motor. When I re-hook everything back up it seems I can't pull the plastic slide device back far enough with the cable. With just a slight amount of finger pressure pulling the plastic slider back, it shuts off. I feel I'm close to solution, however I don't see any way the cable can pull back the slider any more. Good news, motor is OK.
  • Terry D.
    Extremely Frequent Poster
    • May 31, 1987
    • 2690

    #2
    Re: c1 wiper motor continued

    David
    Is everything tight? The mounting bracket, the switch in the dash, etc.? I had just the opposite problem, mine would not turn on. Turn them on manually and switch could change speeds or shut off but not turn back on. Found out at Carlisle that my plastic piece was only half there, letting cable have too much play. Your close to a solution, keep tinkering with it you'll get it.

    Terry

    Comment

    Working...

    Debug Information

    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"