67 400HP CAMSHAFT SPECS - NCRS Discussion Boards

67 400HP CAMSHAFT SPECS

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Rob A.
    Expired
    • December 1, 1991
    • 2126

    67 400HP CAMSHAFT SPECS

    I have a book that shows camshaft-lobe lift(in.) for my original cam as: intake
    0.271 at lifter,.461 at valve... exhaust; .271 at lifter, .461 at valve. I'm being told that these figures are not correct. I would like to confirm these as correct figures, or not, before selecting a cam. (I'm going with a cam close enough to original to use the stock valve train, with the exception of changing the valve springs}.
  • Clem Z.
    Expired
    • January 1, 2006
    • 9427

    #2
    Re: 67 400HP CAMSHAFT SPECS

    the specs i have for cam# 3883986 lift .461/.480, 115 lobe center,duration at .050 214/218

    Comment

    Working...

    Debug Information

    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"