'53-'55 washer bottle/bracket questions - NCRS Discussion Boards

'53-'55 washer bottle/bracket questions

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • George W.
    Very Frequent User
    • May 31, 2000
    • 543

    '53-'55 washer bottle/bracket questions

    I do not own a '53-'55 vette , so my library for these parts is limited to Nolan Adams "The Complete guide.........." -- first edition . I have what I believe to be a never installed washer bottle , bracket , lid w/two nozzels(one plastic , the other metal) , and the "innards" attached to the top which goes down into the bottle . According to what I can see on page 32 , the bracket seems to be an early '53 (narrow top strap) . All diminsions are the same , but someone has advised me that Corvette brackets had only one mounting hole on the bottom ( this one has two). The diagram on page 33 clearly shows two lower mounting holes , but this diagram is for a '55 bracket . I would like to send photos to anyone who could properly identfy these pieces . Thanks in advance , George
  • Roy B.
    Expired
    • February 1, 1975
    • 7044

    #2
    Re: '53-'55 washer bottle/bracket questions

    George Yes the 55 has two lower bolts and two upper, the lid cover has two black plastic nozzels pointing in the same direction . it's the same as the 57 red top nozzels with a pick up rubber tube and sreen.

    Comment

    Working...

    Debug Information

    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"