C3 Source for Leaf Spring Stencil

[Donald Brunswick]

I've looked through the archives and didn't notice a source for leaf spring stencils, does anyone have a source they are happy with?

[Gene M.]

Re: C3 Source for Leaf Spring Stencil

Don,
I think the stenciled P/N is an over the counter replacement identifer.

[Joe L.]

Re: C3 Source for Leaf Spring Stencil

Don and Gene-----

Yes, I agree. Most C2 and C3 PRODUCTION leaf springs did not have the stenciled part number whereas many SERVICE springs did. In later C3 years, like, maybe, after about 1977, it's possible that some PRODUCTION springs had stenciled part numbers.

[Donald Brunswick]

Re: C3 Source for Leaf Spring Stencil

Yes as Joe indicated 82 and some earlier years (not sure where it started) have the part number steciled on the spring just like the drive lines and fuel tanks were stenciled on earlier models but not on later C3's. So if anyone still knows of a source I sure would appreciate it. Or if someone knows of a source for precut from another source using the correct font 1" high I sure I can make my own.

donald

[Patrick H.]

Re: C3 Source for Leaf Spring Stencil

Donald,

Just a thought, but it sure would help if you included the year in your initial heading. "C3" spans too many years to be used for a specific part like this. That way we'd know if you meant 1982 or whatever.

Patrick