Looking for an original set of Rally wheels for my 67. Is there a date code on the wheels? Car built 11/14/66. What should I look for? If anyone has a set to sell, I'm a buyer. Thanks
C-2 1967 Rally Wheels
Collapse
X
-
Re: C-2 1967 Rally Wheels
Chris-----
Yes, the 1967 wheels are date coded. On either side of the valve stem hole will be 2 codings. One will be the wheel code. In your case, this should be "DC". On the other side of the hole will be a series of characters beginning with "K". The "K" indicates the wheel manufacturer which is Kelsey-Hayes. The next character is usually a "1" which indicates the Romulus, MI plant. The third character is the last digit of the year of manufacture. After that will be a one or two digit code representing the month of manufacture. There are similar codes found on the inside rim of the wheel, but these are irrelevent since they can't be seen with the tire mounted on the wheel.
You're looking for wheels date coded 6 months or less prior to your car's build date.In Appreciation of John Hinckley- Top
-
Re: C-2 1967 Rally Wheels
Joe: Aren't the later replacement DC wheels the only ones with date codes near the valve stem hole? I thought all original factory-installed wheels had only the DC (or the other lesser-used codes) with no other lettering on the outside... -k- Top
Comment
-
Re: C-2 1967 Rally Wheels
Karl-----
That could well be the case. The information that I provided was, actually, sort of "generic". The date coding might not apply to the "DC" coded wheels. I thought that the date coding for these wheels started about 1967; it could have been later, though.In Appreciation of John Hinckley- Top
Comment
-
Re: C-2 Rally Wheels
Gents,
For information and a question.
The spare that came out from under my '65 is mounted on a rally wheel ('67)? Under the center cap, there are two stamps. One is GM and the other is KH. Beside the valve stem hole is stamp DC.
I'm sure that this is an original wheel because it is mounted on a well worn Firestone 7.75-15 white wall tire. Contrary to what I've read before, the backside of the wheel is painted GM universal gray and the front is frosted silver over universal gray primer.
Can it be anything other than a '67 rally?
Thanks and regards,
Gene- Top
Comment
-
Re: C-2 Rally Wheels
Sounds like one assuming that is a large DC. DC and DG are both correct for 67 and the dates are found inside the rim, not seen with the tire mounted. there will be a small 1/8 inch or so stamp with month and year.- Top
Comment
-
Re: Background info.
Wayne,
Hate to keep bothering you, but I'm wondering if you can point me in the direction of learning more about wheel width.
As I understand, my '65 has 5.5" wide wheels. Now I know that the '67 rally wheel is 6". I'm wondering when Chevrolet made the change from 5.5" to 6" and why they thought the change was important.
I'm also not sure whether I should leave the '67 rally in the tub as a spare or nix it. Will the extra width be a clearance issue anywhere?
Thanks again,
Gene- Top
Comment
-
Re: Background info.
The aluminum wheels were 6" from their inception (1964), and the steel wheels went to 6" in 1967 (and 7" in '68, and 8" in '69). A rally wheel that's gray on the back is most likely a service replacement, as the production rally wheels were dip-primed black and had just the outer face painted argent silver; K-H painted service wheels themselves, gray all over, before shipping to GM Parts depots.- Top
Comment
-
Re: Background info.
Chris - Original '67 rallye wheel were stamped with the date of manufacture inside the rim. Two stamps were used, a month stamp which was a numerical month designation, e.g. 1 thru 12, and a year stamp which was the last to digits of the year, e.g. 66 or 67.
Date stamping on the outer face of the rallye wheels came about in the beginning of calendar year 1968 (if I remember right).
I also suggest you check out the Restorer article if you have it and also search the DB archives as there have been several threads on this subject. Good luck. Pete- Top
Comment
Comment