Were the hose fittings installed on the water pump when it was installed on the engine, and painted along with the engine and pump?
67 BB H20 PUMP PAINT
Collapse
X
-
Re: 67 BB H20 PUMP PAINT
Rob------
The BYPASS hose fittings, hose, and clamps were installed on the engine when it was painted. The clamps usually show eveidence of overspray. The hose, itself, must have been somehow crudely masked off or covered, although some overspray is often seen on the hose, too.
The heater hose fitting was installed at St. Louis and is NOT painted; just plain old zinc plated.In Appreciation of John Hinckley- Top
Comment