'03-upGM F/s pickups and suvs

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Mike M.
    NCRS Past President
    • June 1, 1974
    • 8288

    #1

    '03-upGM F/s pickups and suvs

    Found a source for the High Beam Headlite Relay Kit which whenn installed will allow for all four lights to work when High Beams is on. Stylinconcepts.com . $59.90 total. REALLY MAKES A DIFFEERENCE FOR OLD EYES> mike
  • Clem Z.
    Expired
    • January 1, 2006
    • 9427

    #2
    you can do the same thing for $4.95 and some wire

    just buy a fog/driving light relay at the auto parts,trigger the relay with the hi beam headlight wire and run a 12 ga fused line from the red terminal in the altenator thru the contacts on the relay to the low beam wire. that way you get a full 14.5 volts to the low beams. if you use a digital volt meter at the headlights you will see that that there is only 11 volts because of the resistance of the wire. i have been doing that since the 4 head light systems can into being.

    Comment

    • Mike M.
      NCRS Past President
      • June 1, 1974
      • 8288

      #3
      Re: you can do the same thing for $4.95 and some w

      $59.90 minus 4.95 = 5 1/2 cases of the beast. thanks clem. mike

      Comment

      • Clem Z.
        Expired
        • January 1, 2006
        • 9427

        #4
        you can send me a case. *NM*

        Comment

        • Dick W.
          Former NCRS Director Region IV
          • July 1, 1985
          • 10485

          #5
          Re: you can send me a case.

          The way to most men's heart is thru their stomach, the way to Doc's is thru his pocket book. That leaves move frog skins for the "beast":D
          Dick Whittington

          Comment

          • Dennis C.
            NCRS Past Judging Chairman
            • January 1, 1984
            • 2409

            #6
            Yes, Frogskins be cool... *NM*

            Comment

            Working...
            Searching...Please wait.
            An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

            Please push the back button and reload the previous window.'
            An unexpected error was returned: 'Your submission could not be processed because the token has expired.

            Please push the back button and reload the previous window.'
            An internal error has occurred and the module cannot be displayed.
            There are no results that meet this criteria.
            Search Result for "|||"