Does the thicker foam seal, the big U shaped one go between the heater box and the core or the core and the firewall? I have two of the thinner seals which could be used on the inside and outside of the firewall. I know one is required on the outside. Thanks for any help.
-
-
Re: Heater Seals 67
Sir,
That foam seal slips over the 4 threaded studs, then the steel core support plate with core mounts over the same studs. The two seals that are identical mount on either side of the firewall.
The order is as follows:
Inner box
Foam seal
Metal core plate
Black sponge seal
Firewall
Black Sponge seal
Outer Box.
Some 1963 only use 1 black seal. ??? Don't know why.
Geoffrey Coenen
PS I just noticed my diagram is wrong. -
Re: Heater Seals 67
Geoffrey,
Your diagram and the shop manual and the AIM are different. That's why the question. Thanks for the clarification.Comment
Comment