Thanks to some members of this board I think I have finally realized why I dont have 3rd gear,no wire to my detent solenoid.Where can I find a diagram that inludes this.The previous owner was real handy with wire cutters.I have found the 2 wire connector at the pedal[org and black].On the outside of the firewall there are 2 wires [one male and one female,both black with pink stripe].My trans solenoid only has 1 wire connector.Should it have 2?Can I run a wire from the harness to the solenoid?Why are there 2 wires?Am I missing something else?I have a diagram but I do not see these wires on it.
Thanks Andrew
Thanks Andrew
Comment