the 69 " a " post windshield moulding , then the stainless weatherstrip mlding. the question is the A.I.M shows a seal used and the diagram shown isn't excellent. does the seal go on the weatherstrip moulding or on the windshield moulding . i am putting these on and not sure where to put body sealant or the neoprene seal . There seams to be an indentation on the weatherstrip seal of about a 1/2" were it mates to the windshield moulding, and while we are at it the stainless moulding running over the top of the winshield the large piece 3" wide and from "a" post to "a" post. the assembly manual also shows a strip of neoprene in the area as well . am i correct?