I am attempting to install a dash harness in my '58. I have the drawings from the AIM and Nolan's books but the routing of the main bundles in and around the steeering column is a little vague. What I deduced from the dwg makes the driver's courtesy switch wires too short. I searched the archive for a little guidance with no luck (John Mc Graw had a similar post in 2000 but no response). Could someone describe or better yet post a photo of the harness as it meanders around steering column area. I didn't take disassembly pictures as one of the three previous owners had removed the harness and reinstalled it by laying it over the brake/clutch pedals and wiper cables. Thanks
C1 dash wire harness routing
Collapse
X
Comment